KUKA KR60L30 with 2 Tons turning table

A perfect cell when you need a high production rate on yours heavy and big products. The 2 tons capacity turning table, with 2400 mm head to tails range give you the possibility to weld any heavy duties part as tractors or bulldozer components. The 2.4 mt KUKA arm is able to reach any point of the table with high accuracy and increasing the quality of your products.

To all this you can add the H type turning table that permits you to weld one part on one side while the operators are preparing the new part on the other side. All this in a highly secure environment.

The cell is ready to work and it would be extremely easy to install. Once you have your Jigs ready you can start you productions in few days. Increase your production today don't wait any longer. You can came to our installation in Bilbao (Spain) to test the system in any moment.

Welding cell that includes the following:

- Kuka KR30L, 6 axis industrial robot, 2400 mm arm reach and 30 kg payload year 2005 equipped with KRC2 controller, Kuka software 5.2.14 under  Win XP

- 9 axis configurations

- Fronius TPS400 ( 400 A) synergic power source

- Welding generator Fronius TPS4000

- Fronius Push pull torch

- Cleaning station

- H table (loading and unloading) 2400mm between head and tail stock. Radius:600mm

- Each side table capacity 2.000 KG

- Table controller panel ( to activate all different job)

- Security scanner Sick